LiteGear LiteDimmer Plus AC400 DMX, 400W, AC
- LiteDimmer Plus AC400 DMX is the ideal companion for powering LiteMat+ Plus and LiteTile+ Plus units up to 400 watts. Its rugged housing includes several mounting options along with four 1/4 -20 threaded inserts for attaching clamps, making it suitable for overhead setups. Locking connections provide AC input and DC output along with DMX pass-through. The unit operates all “Plus+Compatible” Hybrid fixtures up to 400W. The internal electronics include genuine LiteDimmer hardware known for smooth low-end dimming, flicker-free operation, and rock-solid reliability. Simple manual control is provided through the backlit display along with access to DMX settings.
- POWER RATING: 400W
- VOLTAGE INPUT: 100 to 240VAC, 50/60 Hz (C14 Connector)
- VOLTAGE OUTPUT: 24VDC Constant Voltage, PWM (PL7 Connector)
- DATA PROTOCOL: DMX512
- DIMMING RANGE: 0 to 100% Continuous, Flicker-Free
- CONTROLS: On-Board “ON-OFF” Switch, 5-Pin DMX In and Pass Thru, Local Manual Control
- SOFTWARE INTERFACE: Proprietary Connector, Service Center Upgradeable
- MOUNTING: (4) 1/4-20 Threaded Inserts, Drywall Screw Holes, Velcro®/Cable Tie Slots, Rubber Feet, Paracord Lanyard
- AMBIENT TEMP. OPERATION: –10° to +50° C (14° to 122° F)
- IP RATING: IP20
- PROTECTION:Over-Current, Over-Voltage, Over-Temperature, Short Circuit., Unit will shut down and recover, automatically after fault condition is removed.
- SETTINGS: Smoothing, DMX Bit Rate, Dimmer Response
- MODES: Local (HY 1 and HY 2), DMX (HY 1 and HY 2)
- CONVENIENCE OUTLET: 12VDC, 3A Max. (2.1 X 5.5 Barrel)