
Power (Watts) | 50 |
Input Voltage | 9.2 to 18 DC |
Output Voltage | 5 DC |
Length (English) | 6.25 in |
Length (Metric) | 159 mm |
This is a Buck-Boost DC/DC Converter.Buck-boost means that the unit will 'buck' excess voltage or 'boost' insufficient voltage to regulate DC output.This allows you to use your 5 volt DC LEDs on vehicles, solar systems or other off-grid systems, in which the charging system may drive the voltage over 5 volts DC.50 watts maximum output.
5 volts DC output, with fine-tune adjustment screw.(Constant voltage.)
10 amp maximum output.
Working temperature: -10 to +60°C.
Touch-guard screw terminals.
Protections: Short circuit / Overload / Over voltage.
Overload protection type: hiccup mode, recovers automatically after fault condition is removed.
Full load burn-in tested.
Built-in electromagnetic impulse filter.
Low ripple noise.
Accepts 9.2 to 18 VDC input.
No minimum load and no load balancing required.
Proven reliability and rugged housing.
Warranty: 2 years.The serial number on the box is required for any warranty claims.
Optional mounting kit is available.
Do not use a dimmer on the primary side.
- Height (English): 1.5 in
- Height (Metric): 38 mm
- IP Rating: IP20
- Input Voltage: 9.2 to 18 DC
- Length (English): 6.25 in
- Length (Metric): 159 mm
- Manufacturer: Mean Well
- Output Voltage: 5 DC
- Power (Watts): 50
- Rating: CE
- Warranty: 2 years
- Width (English): 3.86 in
- Width (Metric): 98 mm
Use to protect 5 volt DC LED systems on vehicles, solar systems or other off-grid systems, in which the charging system may drive the voltage over 5 volts DC.
MeanWell SD-50 Specification Sheet
EnvironmentalLights LED Drivers (Non-Dimmable)