|Input Voltage||19 to 36 DC|
|Output Voltage||24 DC|
|Length (English)||6.25 in|
|Length (Metric)||159 mm|
This is a Buck-Boost DC/DC Converter.Buck-boost means that the unit will 'buck' excess voltage or 'boost' insufficient voltage to regulate DC output.This allows you to use your 24 volt DC LEDs on vehicles, solar systems or other off-grid systems, in which the charging system may drive the voltage over 24 volts DC.50 watts maximum output.
24 volts DC output, with fine-tune adjustment screw.(Constant voltage.)
2.0833 amp maximum output.
Working temperature: -10 to +60°C.
Touch-guard screw terminals.
Protections: Short circuit / Overload / Over voltage.
Overload protection type: hiccup mode, recovers automatically after fault condition is removed.
Full load burn-in tested.
Built-in electromagnetic impulse filter.
Low ripple noise.
Accepts 19 to 36 VDC input.
No minimum load and no load balancing required.
Proven reliability and rugged housing.
Warranty: 2 years.The serial number on the box is required for any warranty claims.
Optional mounting kit is available.
Do not use a dimmer on the primary side.
- Height (English): 1.5 in
- Height (Metric): 38 mm
- IP Rating: IP20
- Input Voltage: 19 to 36 DC
- Length (English): 6.25 in
- Length (Metric): 159 mm
- Manufacturer: Mean Well
- Output Voltage: 24 DC
- Power (Watts): 50
- Rating: CE
- Warranty: 2 years
- Width (English): 3.86 in
- Width (Metric): 98 mm
Use to protect 24 volt DC LED systems on vehicles, solar systems or other off-grid systems, in which the charging system may drive the voltage over 24 volts DC.
MeanWell SD-50 Specification Sheet
EnvironmentalLights LED Drivers (Non-Dimmable)