|Input Voltage||10.5 to 30 DC|
|Output Voltage||12 DC|
|Length (English)||12 in|
|Length (Metric)||305 mm|
This is a Buck-Boost DC/DC Converter.Buck-boost means that the unit will allow the DC input voltage to be higher or lower than the output voltage, which lets you use 12 volt DC LEDs on a boat or vehicle, where the charging circuitry ordinarily exceeds 12 volts and would otherwise damage your LEDs.Limits DC voltage to no more than 12 Volts.
8 amp (100 watt) maximum.
Converter will boost a voltage as low as 10.5 volts to 12 volts and buck (limit) up to 30 VDC at 12 VDC, a stable output that will protect your LEDs and controllers.
Output voltage adjustment from 11 - 13.9 volts by internal potentiometer VR2, near C2.
Peak output power of 120 watts (case gets to 60°C at 120 Watts continuous, external cooling can extend).
No-load overhead < 100 mA.
Line regulation: 1%.
Load regulation: 3%.
Temperature range: 0-55°C = 32-130°F.
Input polarity protection;
Input low voltage drop out [power off reset;]
Input high voltage protection [power off reset;]
Output short circuit protection [auto reset;]
Output current limit [auto resume;]
Over temperature protection [power off reset.]
Do not use a dimmer on the primary side.
Running motors from this unit will void the 1-year manufacturer warranty.
- Height (English): 1.625 in
- Height (Metric): 41 mm
- IP Rating: IP20
- Input Voltage: 10.5 to 30 DC
- Length (English): 12 in
- Length (Metric): 305 mm
- Manufacturer: Neuron Technology
- Output Voltage: 12 DC
- Power (Watts): 100
- Warranty: 1 year
- Width (English): 3.5 in
- Width (Metric): 89 mm
Use to protect 12 volt DC LED systems on vehicles, solar systems or other off-grid systems, in which the charging system may drive the voltage over 12 volts DC.
100 Watt 12 VDC Converter Manual
EnvironmentalLights LED Drivers (Non-Dimmable)