|Input Voltage||120 or 240 AC|
|Output Voltage||24 DC|
|Input Current||2500 mA|
|Length (English)||9.25 in|
High quality well-regulated adapter suitable for powering our LED lighting.96 watts maximum output.
24 volts DC output.(Constant voltage.)
4 amp maximum output.
UL listed Class 2 power supply.
North American 5 foot input cable.
Output cable consists of a y-splitter with two plugs, standard 2.1 mm inside diameter tuning fork; 5.5 mm outside diameter.
Output cable is about 1.5 feet to the Y-splitter, then 2 additional feet on each of the 2 output plugs.
Protections: Short circuit / Overload / Over voltage.
Full load burn-in tested.
Built-in electromagnetic impulse filter.
Low ripple noise.
Universal, auto-sensing: accepts 100 to 240 VAC input without adjustment, 50 or 60 Hz.
No minimum load and no load balancing required.
Proven reliability and rugged housing.
Operating temperature range: -10 to +60 °C.
Class 2.UL, CUL listed.
Warranty: 1 year.
Do not use a dimmer on the primary side.
- Finish: Black
- Height (English): 1.57 in
- Height (Metric): 40 mm
- IP Rating: IP20
- Input Current: 2500 mA
- Input Voltage: 120 or 240 AC
- Length (English): 9.25 in
- Length (Metric): 235 mm
- Manufacturer: EnvironmentalLights
- Output Voltage: 24 DC
- Power (Watts): 96
- Rating: UL, CUL
- Warranty: 1 year
- Width (English): 2.48 in
- Width (Metric): 63 mm
For use with 24 volt DC LED lighting or other loads. (Constant voltage.) Not for use with dimmers.
EnvironmentalLights LED Drivers (Non-Dimmable)
EnvironmentalLights Class 2 Power Supplies UL Certificate-EPBU
Driver-96-24-NA Dimensional Drawing