
Power (Watts) | 60 |
Input Voltage | 120 or 240 AC |
Output Voltage | 12 DC |
Input Current | 1400 mA |
Length (English) | 5 in |
High quality well-regulated adapter suitable for powering our LED lighting.60 watts maximum output.
12 volts DC output.(Constant voltage.)
5 amp maximum output.
UL listed Class 2 power supply.
North American, European, UK or Australia/NZ/Argentina plug, 5 foot input cable.
Output plug is standard 2.1 mm inside diameter tuning fork; 5.5 mm outside diameter.
Output cable is about 6 feet long.
Protections: Short circuit / Overload / Over voltage.
Full load burn-in tested.
Built-in electromagnetic impulse filter.
Low ripple noise.
Universal, auto-sensing: accepts 100 to 240 VAC input without adjustment, 50 or 60 Hz.
No minimum load and no load balancing required.
Proven reliability and rugged housing.
Operating temperature range: -10 to +60 °C.
UL, CUL, CE listed.
Warranty: 1 year.
Do not use a dimmer on the primary side.
- Finish: Black
- Height (English): 1.35 in
- Height (Metric): 34 mm
- IP Rating: IP20
- Input Current: 1400 mA
- Input Voltage: 120 or 240 AC
- Length (English): 5 in
- Length (Metric): 127 mm
- Output Voltage: 12 DC
- Power (Watts): 60
- Rating: UL Listed, CUL Listed, CE
- Warranty: 1 year
- Width (English): 2.1 in
- Width (Metric): 53 mm
For use with 12 volt DC LED lighting or other loads. (Constant voltage.) Not for use with dimmers.
EnvironmentalLights LED Drivers (Non-Dimmable)
EnvironmentalLights Class 2 Power Supplies UL Certificate-EPBU