|Input Voltage||120 to 277 AC|
|Output Voltage||12 DC|
|Length (English)||8.9 in|
|Length (Metric)||226 mm|
IP67 waterproof (dust-tight and protected against the effects of temporary immersion in water).Epoxy encapsulated, with metal case.This is a very well-designed and built, high reliability supply.150 watts maximum output.
12 volts DC output.(Constant voltage.)
12.5 amp maximum output.
Built-in active Power Factor Correction (PFC).
Working temperature: -40 to +60°C.
Bare wire cables in and out.
Protections: Short circuit / Overload / Over voltage.
Overload protection type: hiccup mode, recovers automatically after fault condition is removed.
Full load burn-in tested.
Built-in electromagnetic impulse filter.
Low ripple noise.
Universal, auto-sensing: accepts 90 to 305 VAC or 127 to 431 VDC input without adjustment.
No minimum load and no load balancing required.
Proven reliability and rugged housing.
UL8750, EN61347-1, EN61347-2-13 independent IP67 approved; Design refer to UL60950-1, TUV EN60950-1.
Warranty: 5 years.The serial number on the box is required for any warranty claims.
Do not use a dimmer on the primary side.
- Height (English): 1.53 in
- Height (Metric): 38.8 mm
- IP Rating: IP67
- Input Voltage: 120 to 277 AC
- Length (English): 8.9 in
- Length (Metric): 226 mm
- Manufacturer: Mean Well
- Output Voltage: 12 DC
- Power (Watts): 150
- Rating: UL Recognized FKSZ, CE, IP67
- Warranty: 5 years
- Width (English): 2.68 in
- Width (Metric): 68 mm
For use with LED lights operating on 12 volts DC. IP67 waterproof.
MeanWell HLG-150H Specification Sheet
EnvironmentalLights LED Drivers (Non-Dimmable)
LED Driver Sound Ratings