Nimbus WiMi5200A System & WiMi1000 Bundle
Key Features
- 4921' Range over 5 GHz Wi-Fi
- 30ms Latency
- Up to 1080p60 SDI Signals
- Transmitter: SDI Input & Loop Output
- Receiver: SDI Output
- H.264 Encoding/Decoding
- L-Series Battery Plate
- Power Adapter Included
- 1/4"-20 Mounting Threads
The WiMi5200A Wireless 3G-SDI H.264 Encoder/Decoder Set from Nimbus is a point-to-point Wi-Fi transmission system with a 4921' range and only 30ms latency. With both units featuring built-in 5 GHz Wi-Fi, no additional network connection is required. The transmitter encodes and sends up to a 1080p60 SDI signal as an H.264 encoded signal, and the receiver decodes and outputs it as video.
The transmitter features a 3G/HD/SD-SDI input and 3G/HD/SD-SDI loop output, and the receiver has a single 3G/HD/SD-SDI output. The set includes one L-series battery plate for the transmitter and one power adapter for the receiver, although both units support continuous power via 2-pin LEMO inputs. Both units offer a 1/4"-20 mounting thread on the bottom.
Key Features
- 4921' range over 5 GHz Wi-Fi
- 30ms latency
- Up to 1080p60 SDI resolution
- H.264 (MPEG-4 Parts 10: AVC) encoding/decoding
- Transmitter: 3G/HD/SD-SDI input and loop output
- Receiver: 3G/HD/SD-SDI output
- Baseline profile with level 4.2
- DIP switch selection of Wi-Fi frequency and encoding rate
- 1/4"-20 mounting threads
Nimbus WiMi1000 Wireless AP Repeater
Key Features
- Extends Wireless Distance by 4000'
- 1 ms Latency
- Enables Going Around Building Corners
- Reinstates Line of Sight
- DIP Switch Configuration
- L-Series Plate & Power Adapter Included
- 1/4"-20 Mounting Thread
Compatible with select Nimbus wireless transmission systems, the Nimbus WiMi1000 Wireless AP Repeater allows you to extend the wireless distance between the transmitter and receiver by 4000' with 1 ms latency. It lets you do this even when something is blocking the line of sight, as long as both units have a line-of-sight view of the repeater.
A common application is using the repeater to go around corners. For example, if you place the repeater on a corner of a building, and both your transmitter and receiver are on different sides of that building, as long as each one has a line of sight of the repeater, the repeater will connect them and increase transmission distance by 4000'. A 5000' system, for example, can be extended to 9000'. It works the same way in fields, tunnels, and various other settings.
The repeater comes with an L-series battery plate as well as a power supply. Simply mount it on the corner or other location via its 1/4"-20 mounting thread, power it on, and set its DIP switches to match the DIP switch settings of the transmitter/receiver set. The repeater is compatible with the Nimbus WiMi5150A, WiMi5200, WiMi5200A, and WiMi6220 wireless transmission systems.
Key Features
- Extends the wireless distance between the transmitter and receiver by 4000'
- 1 ms latency
- Enables going around corners when line of sight is broken
- DIP switch setup
- L-series battery plate and power supply included